SKIL 6002 CA Hammer drill

مثقاب مطرقي مدمج بتصميم مريح
مثالية لجميع أعمال الثقب داخل وخارج المنزل
معدل طرقات مرتفع في الدقيقة من أجل الثقب السريع في الطوب دون عناء

SKIL 6002 CA Hammer drill

The handy, compact hammer drill
The SKIL 6002 hammer drill has a compact, comfortable design and an efficient 500W motor that gets your DIY jobs done. It’s suitable for all regular drilling jobs. The variable speed with speed pre-selection gives versatility and control of your job. This hammer drill has a keyed chuck, so you can secure the chuck extremely tight and prevent the drill from slipping during the job. The tool has a range of handy features like the lock-on button for continuous working. This hammer drill is supplied with a set of three 5, 6 and 8 mm masonry drill bits.

Ideal hammer drill for your drilling jobs
The hammer drill has a 13 mm keyed chuck, which means you can secure the chuck extremely tight using the chuck key. This prevents the drill from slipping during the job. The hammer mechanism is for drilling in masonry and the hammer mode can be switched off for regular drilling and screwdriving. All these features make this hammer drill ideal for your drilling jobs in and around the home.

Variable speed with speed pre-selection for optimum control
The tool has variable speed for precise drilling and driving. You can adjust the preferred speed with the speed pre-selection wheel. For your convenience you can lock the trigger for continuous drilling and driving.

Handy features for extra working comfort
This hammer drill has a range of handy features, for example the reversing function. This comes in handy for instance when you’re loosening or removing screws. The drill is supplied with a set of three 5, 6 and 8 mm masonry drill bits.

Award Winner

Result:
Awarded Best choice

Competitive advantage according to testing result:
Sturdy machine with aluminium footplates High quality finish of the work piece Pleasant rear grip, good grip on the front handle

Where and when tested:
France, Système D, 10.2011

See Test Publication

SKIL 6002 CA Hammer drill

Specifications

Input: 500 W
Chuck capacity: 13 mm
Drilling capacity in steel: 13 mm
Drilling capacity in masonry: 16 mm
Drilling capacity in wood: 30 mm
No-load speed: 0-3000 r.p.m.
Maximum impact rate: 0-48000 /min
Chuck type: Keyed
Weight: 2.1
Voltage/frequency: 220-240V/50-60Hz

Features

مثقاب مطرقي مدمج بتصميم مريح
مثالية لجميع أعمال الثقب داخل وخارج المنزل
معدل طرقات مرتفع في الدقيقة من أجل الثقب السريع في الطوب دون عناء
مصد طرق لأعمال الثقب المنتظم وربط وفك البراغي
وظيفة الدوران العكسي لربط وفك البراغي
مفتاح السرعة المتغيرة مع: - زر الغلق والتشغيل للعمل بشكل متواصل - مفتاح اختيار السرعة لاختيار السرعة بشكل مسبق لتوفير الأداء المثالي في كافة الاستخدامات